|
Re: Is default code already loaded?
it should work - does the LED on the victor stay steady yellow with the joystick centered, and go green on full fwd and red on full rev?
do you have the victor powered through a 30 or 40 Amp breaker?
are you sure you got the victor hooked up with power on the right side? ( the same side as the pwm cable is on?)
if the LED on the victor blinks yellow it means its pwm cable is not plugged in straight, or pushed down all the way, or the cable is backwards at one end or the other
Last edited by KenWittlief : 19-02-2004 at 17:54.
|