View Single Post
  #2   Spotlight this post!  
Unread 19-02-2004, 21:10
Rickertsen2 Rickertsen2 is offline
Umm Errr...
None #1139 (Chamblee Gear Grinders)
Team Role: Alumni
 
Join Date: Dec 2002
Rookie Year: 2002
Location: ATL
Posts: 1,421
Rickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant future
Send a message via AIM to Rickertsen2 Send a message via Yahoo to Rickertsen2
Re: Changing 1 joystick code to 2 (rookie team)

Quote:
Originally Posted by Brawler006
We are a rookie team and we have noobies working on the C code.
We see the code for 1 joystick drive i.e.

/*---------- 1 Joystick Drive ----------------------------------------------
*--------------------------------------------------------------------------
* This code mixes the Y and X axis on Port 1 to allow one joystick drive.
* Joystick forward = Robot forward
* Joystick backward = Robot backward
* Joystick right = Robot rotates right
* Joystick left = Robot rotates left
* Connect the right drive motors to PWM13 and/or PWM14 on the RC.
* Connect the left drive motors to PWM15 and/or PWM16 on the RC.
*/
pwm13 = pwm14 = Limit_Mix(2000 + p1_y + p1_x - 127);
pwm15 = pwm16 = Limit_Mix(2000 + p1_y - p1_x + 127);

etc....

This is a 4 motor robot and we need one joystick to control the left side and a second joystick to control the right side.
HELP US PLEASE!!!! WE HAVE NO IDEA WHAT WE ARE DOING!!!

Thanks,
A Rookie Team
Ok i can help you. Just tell me what ports your joysticks are connected to and what PWMs your motors are connected to, and i'll tell you what to change.
__________________
1139 Alumni