|
Re: Switching the Channel for Competition
Quote:
|
Originally Posted by Billfred
Switch choices and ergonomics of the box aside, any comments on the updated wiring scheme?
|
Wiring looks fine, just make sure you are looking at the correct side of the connector when you wire it together. The view you have is looking at the front of your Digi-key soldercup connector, not the back where the wires connect.
[edit] LEDs with integral resistors came in the robot kit, or Radio Shack carries them. As dez250 says you'll need a resistor in series or you'll burn out the LED rather quickly.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 13-04-2004 at 11:12.
|