|
Re: gear ratios
Quote:
|
Originally Posted by sanddrag
While I am able to visualixe this, a picture would be magnificent. Looking at any picture of a drive system is always a learning experience for me Thanks. Also. what pitch chain was it, .1475 ?
|
Hope this helps. We used .250 ( 1/4 ) pitch chain and sprockets. The large sprocket on the right is driven by the drill motor, you can't quite see the 9 tooth sprocket driven by the chip on the same shaft to the right of the 32. This main shaft also drives two 9 tooth sprockets which go to our reduction sprockets/shafts. There are five sprocket/shafts for the primary drive leading to the wheels.
The setup was very reliable. If you need more specs let me know.
__________________
If you think you can, or if you think you can't, you're probably right.
2005 Palmetto AutoDesk Award
2005 Palmetto Judges Award
2005 Palmetto Semi-Finalists
2005 NJ Regional Chairmans Award
2005 NJ Regional Finalists
2004 Curie Div. 5th Seed
2004 Palmetto Regional Winners
2004 Palmetto DC Team Spirit Award
2004 Chesapeke Semi-Finalists
2004 Trenton Semi-Finalists
Last edited by S.Nickens : 27-04-2004 at 22:36.
|