Quote:
|
Originally Posted by arpus maximus
yes, we have that set up correctly. The DB-9 work for the tether and for the program ports, is it possible that the same cables will not work for the RC-422 ports?
|
I think the same cables that work for the tether and program will work for the radio too (on 2000-2003 systems).
Quote:
|
Originally Posted by arpus maximus
We are using RS-422 Data Modems (of the IFI screamer variety) as it says to.
|
There are (at least) two different types of radio modems. One pair is used for communication between the Robot Controller and the Operator Interface. The other pair, which I believe is labeled "Ewave Screamer," is used for remote programming and debugging. If your radios say "Ewave Screamer" rather than "Innovation First" in big white letters, you probably have the wrong radio.
That's the only potential problem that I can think of at the moment from what you've said...good luck!