[Pat Roche]

I have so many comments and ideas on this topic I dont even know where to start.

I have been doing research and such in pnuematics pretty actively for the past year or so. I have generated suction systems, recycle systems, multi-positioning systems and many more.

I could be wrong but I don't recall the use of venturi pumps being illegal this past season. In fact I think that may have been what team 69 used. I know for the offseason competitions we have been developing a suction system for manipulating 2x balls. To do this we have integrated I have integrated a venturi pump into the system and it works beautifully. To stop the flow of air through the pump all you have to do is place a solonoid on each side of the pump, that way you can turn your airflow off and still hold onto whatever object you are grappled onto(at least thats the way we have to do it with the pump we have).

As far as valve restrictions I tend to disagree with rickertsen's 3 way valve. This problem with it is that in a machine that uses lots of pnuematics(ie. 134 bot this past season which ran only two motors) it takes time and power to charge this system. Having a 3 way on a machine like that counters some of your previous arguements. (i could have misinterpretted you however)

Otherthings id like to see changed is that i think you should be able to make your own custom air containers. Using Copper piping to create an accumulater might be lighter than current accumulators and would be cheaper. To test for leaks in my current job (running pipe with plumbers) we pressure the system well over 100lbs of pressure and the pipes hold with solder. Its and economical solution that is cheap and allows for custimization of a system.

Ill prolly come up with some more stuff...
So please ponder some on these thoughts

-Pat