|
Re: Motor Info
Thanks for the help. If I was to calculate using approx. 75% on the CIM and 85% on the drill would it work in practice or would the numbers only be usable in theory? For instance: if I wanted to get to 150 RPM I figured I could gear the CIM from 4200 (1->28) or the drill from 16800 (1->112), now if I was to use this in actual practice would it work well or should I expect torque issues?
__________________
Mentor to Teams 555, 1929, and 2070!
Currently working in hardware design at Cisco.
Cornell University DARPA Urban Challenge - http://www.cornellracing.com
Co-Captain Team 555 - 2003,2004,2005
Trust, Love, and Magic
|