|
Re: encoders
On the compressor, I would do something like this:
"if (p1_wheel => 127)
{
relay1_fwd = 1
)
else
{
relay1_fwd = 0
)
"
The setup should be as follows:
You should have a joystick connected to port 1. You should have a spike sonnected to relay port 1.
When you rotate the throttle (the big wheel) on the joystick away from you all the way the compressor will turn on, otherwise, the compressor will not turn on.
__________________
Team 1097 -- Site 3 Engineering ~~~~~~~~~~~~~~~~~~~~ 2003 Sacramento Rookie All Star 2003 Silicon Valley Rookie All Star 2004 Sacramento Engineering Inspiration Award 2004 Sacramento Visualization Award 2004 Outstanding Volunteer Award (G. Glasser) 2004 Silicon Valley Sportsmanship Award
2004 National Visualization Runner Up
2004 Cal Games Finalist
2005 Sacramento Sportsmanship Award
2005 Sacramento #1 seed
2005 Sacramento Finalist
2005 Silicon Valley Sportsmanship Award
2005 Silicon Valley #1 Seed
2005 Silicon Valley Finalist
|