|
Re: 2005 FP Pinion
Quote:
|
Originally Posted by Paul Copioli
Do not worry about this number. It is the date code used by Mabuchi to indicate when (and where, I think) the motor was manufactured. If you have the same number on the top line, then it is the same motor.
-Paul
|
Paul,
Dr. J measured 10A at 0.8V stall current on his 14T motor.
Team 177 measured 10A at 2.5V stall current on our 13T motor.
While I will admit that we did not measure the voltage right at the motor, I refuse to believe that we dropped 1.7V in the wires and connectors. I would guess more in the 200 to 400 mV range which puts our 12V stall current closer to the 60A indicated for 12V FP motors in the past. Whereas Team 47's motor has a 12V stall current closely matching the 150A specified for the 6V model.
I submit that we have different motors.
Regards,
__________________
Mike Betts
Alumnus, Team 3518, Panthrobots, 2011
Alumnus, Team 177, Bobcat Robotics, 1995 - 2010
LRI, Connecticut Regional, 2007-2010
LRI, WPI Regional, 2009 - 2010
RI, South Florida Regional, 2012 - 2013
As easy as 355/113...
|