[dez250]

Ive found a pretty easy way to make them cheaply.

While walking through the paint aisle at Home Depot today my eye was caught by a shelf display of bucket lids. These lids are made for buckets from like 5" to over a foot in diameter. The larger ones are 1/4" HDPE and the smaller ones are 1/8" LDPE. The nice thing is i was able to just trace more or less the whole clover on the lid and cut it out with scissors. Since it is a little flimsy i decided to do two clovers per corner. The lids i used were for 8" diameter buckets and were 48 cents each. Hope this helps you out.