[elknise]

We can't tell, but it looks like our spring clips are rubbing. Is it ok to leave them out? Also, our 1/8" long set screws were in Misc Bag II and they were a tad to long, they did stick out a little. I was wondering if filing them down would decrease the sound in our transmissions.

Also, regarding filing out the nylon washers. In the Misc Bag 2, there are four that have a slightly wider whole for the two shafts in each transmission, not the motor shafts. I hope this helps. When we set up our transmissions, we messed this up and put the four larger washers on the motors on accident and had to totally disassemble both of them and switch them out.