View Single Post
  #4   Spotlight this post!  
Unread 20-01-2005, 00:17
KVermilion's Avatar
KVermilion KVermilion is offline
... clearly ...
#0649
 
Join Date: Jan 2005
Location: Saratoga, Ca
Posts: 52
KVermilion is infamous around these parts
Re: The Hall Effect sensor wiring?

Quote:
Originally Posted by jgannon
Cut the male end off of a PWM cable. Connect the red wire to pin 1, the white wire to pin 2, and the black wire to pins 3 and 4. Then plug the female end of the cable into the input on the RC.
You are forgetting the regulated power supply protection.

You saboteur!

(That last line is satire.)