Thread: Using SMC Single Selenoid Valve from last year?
View Single Post
  #1   Spotlight this post!  
Unread 20-01-2005, 21:20
Sachiel7's Avatar
Sachiel7 Sachiel7 is offline
<Yes I managed to flip it
AKA: Shayne Helms
FRC #1132 (RAPTAR Robotics)
  
Join Date: Sep 2002
Rookie Year: 2002
Location: Richmond, VA
Posts: 541
Sachiel7 is just really niceSachiel7 is just really niceSachiel7 is just really niceSachiel7 is just really niceSachiel7 is just really nice
Send a message via AIM to Sachiel7
Using SMC Single Selenoid Valve from last year?
I had a quick question about this year's Pneumatics Regulations
According to rule <R91>:
<R91> The following pneumatics items may be added to your robot:
• You may use a previous year’s Kit pneumatic cylinders and solenoid valves in addition to those items in the 2005 Kit, but you must account for their costs as explained in the Cost Limits and Accounting section.

Does this mean we can use the SMC Single Selenoid Valve from last year? To be honest, I'm not too pleased with the single selenoid valves we've been given this year, and I'd like to know if I can reuse last year's SMC.
__________________
-=Sachiel7=-

There's no such thing as being too simple!
Look for Team #1132, RAPTAR Robotics at the VCU Regional this year!