Thread: Four wheel drive question
View Single Post
  #16   Spotlight this post!  
Unread 21-01-2005, 11:38
MattB703 MattB703 is offline
Registered User
AKA: Matt
None #0703 (Team Pheonix)
Team Role: Engineer
  
Join Date: Oct 2001
Rookie Year: 1998
Location: Saginaw, MI
Posts: 233
MattB703 has much to be proud ofMattB703 has much to be proud ofMattB703 has much to be proud ofMattB703 has much to be proud ofMattB703 has much to be proud ofMattB703 has much to be proud ofMattB703 has much to be proud ofMattB703 has much to be proud ofMattB703 has much to be proud ofMattB703 has much to be proud of
Re: Four wheel drive question
Quote:
Originally Posted by haverfordfords
Yes, but according to that FAQ it seems that we need 2 of BOTH anyway? Is that true?

Well, you should need a total of 4 big sprockets, one for each wheel, and a total of 4 small sprockets, 2 on each geabox output. Then you will put 4 separate chains, one to each wheel. You could run with only 1 sprocket on each output and use one longer chain to turn both wheels on that side but I'd advise against it. You would need to make a semi elaborate idler system to get an adequate (more that 150°) of chain wrap on the drive sprocket.
Reply With Quote