|
LCD wiring to Program port
I am in the process of wiring up a BPP-420 LCD to the Program port on our RC for use with Kevin Watson's serial port code. I have pin 3 of the serial connector connected to the data pin on the LCD, I have the +5 pin from a digital I/O connected to the +5 pin on the LCD, and I have pin 5 and the ground from a digital I/O connected to the ground pin on the LCD. Is this the proper wiring? I couldn't find an actual pinout of the Program port, so I just went with the RS-232 standard, but I want to make sure it's right before I power it up.
__________________
Team 1743 - The Short Circuits
2010 Pittsburgh Excellence in Design & Team Spirit Awards
2009 Pittsburgh Regional Champions (thanks to 222 and 1218)
2007 Pittsburgh Website Award
2006 Pittsburgh Regional Champions (thanks to 395 and 1038)
2006 Pittsburgh Rookie Inspiration & Highest Rookie Seed
Team 1388 - Eagle Robotics
2005 Sacramento Engineering Inspiration
2004 Curie Division Champions (thanks to 1038 and 175)
2004 Sacramento Rookie All-Star
_
|