|
Re: LCD wiring to Program port
Refer to page 11 of "2004 Full-Size Robot Controller Reference Guide".
If I call +5V pin 1, then pin 1 goes to +5 of the LCD, Pin 2 goes to data in of the LCD and pin 4 goes to ground on the LCD.
__________________
Mike Betts
Alumnus, Team 3518, Panthrobots, 2011
Alumnus, Team 177, Bobcat Robotics, 1995 - 2010
LRI, Connecticut Regional, 2007-2010
LRI, WPI Regional, 2009 - 2010
RI, South Florida Regional, 2012 - 2013
As easy as 355/113...
|