Quote:
|
Originally Posted by sirbleedsalot
We are trying to wire the kit bot, and we need to know what motor goes to what pwm output on the rc? Also what ports to hook up the joy sticks to. Or better yet a detailed document that tells us how to wire the kit bot in its default configuration. We have the power cables wired, but we can't seem to get the motors to run when we move the joysticks. If we hook up the victors to outputs 1 and 3 the motors will run constantly, but the joysticks have no control over them. Please help a team that can't even drive their bot.
|
try pwms 13 and 15 or pwms 11 and 12 depending on what default program you have loaded. Then the x and y joystick off of port 1 should control your motors.
Edit: Also make sure your x and y trim are set so the motors don't run when idle.