Quote:
|
Originally Posted by stephenthe1
no, I checked. it's turned on. but we're still having problems (won't even turn on led's)
|
Make sure..
1) Both the back up battery (7.2V) and 12V are charged.
2) You have the 12V battery connected to the robot.
2) You have the back up battery connected to the robot.
If this doesn't work, I would take a volt meter and measure the voltage across the red and black pwm cable connected to your camera's power input to make sure that your camera is getting power. Also, make sure that the black wire for the power is plugged into the camera board where there is a 'B' marking.