Quote:
|
Originally Posted by roboticsjenkins
The readme did not explain the wiring, it was only programming language which I have no clue how to interpret. I know I have to wire it to the analog input to get power pu on this Gyro it says nothing about which color wire is what, I am still scratching my head on what to do. It has a blue, green and white wire. I believe the green wire is a ground, however I do not know where the blue and white wire go.
|
I have never personally used this gyro, but you can find the datasheet for this gyro at
http://www.analog.com/UploadedFiles/...ADXRS150_B.pdf . It will include a pinout.
----------------------- EDIT --------------------------------
You are obviously using some kind of demo board for this chip, bc there is almost no way to solder to it.
The dasheet for the demo board is at
http://www.analog.com/UploadedFiles/...XRS150EB_0.pdf
It looks like you need to conect it as follows:
AGND
AND OR PGND: connect ground
AVCC
AND PDD: connect to 5v
RATEOUT: connect to input (sig)
In order to get better noise rejection, you may want to add some bandwidth reducing capacitors as described in the datasheet.