Quote:
|
Originally Posted by Sscamatt
Somehow they are using 6 40 amp breakers on each....even though there are only 4 things that can be on 40 amps
|
5.3.9.1 Circuit Breaker / Fusing Rules
<R79> You must use the auto resetting Snap Action circuit breakers provided in the Kit Of Parts to protect all the active Circuit Breaker/ Power Distribution Panel branch circuits from overload.
<R80> You must protect the Robot Controller power feed with a 20A Circuit Breaker. You may not connect any other electrical load to this breaker.
<R81> You must protect the Air Compressor power feed with a 20A Circuit Breaker. You may not connect any other electrical load to this breaker.
<R82> You must protect the power feed to Custom Circuits and Additional Electronics with a 20A Circuit Breaker.
<R83> Speed Controllers may be protected by 20A, 30A, or 40A Circuit Breakers. Speed Controllers may power motors or devices of any size.
R83 seems to indicate that you can plug any of the motors into the 40 amp breakers. I know this is against/different than what we have had to do in prior seasons, but I still think it reads that way.
(sorry for posting the entire section, but I think it helps explain)
-Bill