[Tom Bottiglieri]

We are using an old BEI gyro for testing, while we wait for our AXDR150EB to come in from analog devices. We also do not have the connector, and found the best way to connect it was to either use a pwm cable across the top and bottom rows, then splice it at the other end and solder the wires in the correct order. If you dont want to waste pwm cables, rip some header cables out of an old PC. Two 3 prong females (1 for gyro, 1 for RC), and a 1 prong female (for top row of gyro connections) should do the trick.