Thread: Problem downloading any Camera code
View Single Post
  #1   Spotlight this post!  
Unread 03-02-2005, 20:58
zuckie13 zuckie13 is offline
Registered User
AKA: Matt Zuckerman
FRC #0053 (Area 53 - Alien Cow Abductors)
Team Role: Mentor
  
Join Date: Nov 2004
Rookie Year: 2004
Location: Greenbelt, MD
Posts: 4
zuckie13 is an unknown quantity at this point
Problem downloading any Camera code
We've run into a weird problem when downloading any code with camera code in it (including the default hex file included with the 2.4 default code). Any time we download this code, we get a code error from the controller. Dashboard says it's "Invalid CONTROL or CURRENT MODE byte". Code that doesn't use the camera works fine. Weird thing is, a short bit after downloading the code and seeing the error, the voltage on the oi reads around 8v and gives a low voltage warning (note that the battery is fully charged to 12+ volts), and the backup is also fully charged.

We are using:
FRC controller updated with version 10 master firmware
IFI Loader 1.0.10 - current version of this

If anyone has seen this and can offer a suggestion it would be of great help.