[Mike Betts]

Originally Posted by HPA_Robotics_13

Team 833 needs some help with their camera:
We can talk to the camera unit from our laptop via the DB9 connector. But we cannot get the RC to communicate with the camera, even using the default code.

We have disconnected the DB9 link. We have ensured the 7.2V battery is adequately charged.

Any help would be greatly appreciated (our programming team says that they have read all other threads about the camera system and no one else seems to have had this problem).

I would contact IFI about your problem. It sounds like you either have it installed/connected incorrectly or have a defective system.