|
Re: RC won't talk to CMUcam
Hi,
I didnt read anything mentioning the TTL port, if the camera is not connected to the TTL port on the rc it wouldnt work so basically the setup is something like this:
PWM1--> Camera: Power
Servo--> Camrra: Direction
TTL-->Camera:Communication
And make sure all the 3-pin wires have the black alligned with the little B on the camera board.
Hope this helps, my $0.02
__________________
.:Bringling Brains to Life:.
03,04,05-Team 1219 Captain
2003 Rookie all Start @ GTR
2005 Galileo Semi-Finalist & Alliance captain
06-Team 1219 Mentor
2006 Radio Shack Innovation in control @ Waterloo
|