|
Re: Dead battery!
Everyone keeps saying check the battery terminal to make sure it didn't short, if it did, there would be large scorch marks on the chassis where it made contact (I've seen 6awg get arc-welded onto metal by shorting). Also, check your breaker block, there was a mfg warning that said stuff inside of it may come loose during shipping and you should open it up to check for loose hardware, that could be the cause of all your problems. I would also try using a current sensor (not FIRST one, the one on a multimeter) to measure how much current you are drawing while running. In 2003 we were drawing 60amps with the bot up on blocks and the current sensor helped us pinpoint the problems (loose electrical connection and one of the transmissons). Good luck!
__________________
Theory is a nice place, I'd like to go there one day, I hear everything works there.
Maturity is knowing you were an idiot, common sense is trying to not be an idiot, wisdom is knowing that you will still be an idiot.
|