Quote:
|
Originally Posted by dez250
With the Atwood/CIM motors you should use the victor motor controllers between the power source and the motors (which you are using) but what should be bridging from the battery to the victor is a 40amp self resetting circuit breaker. You should only have fuses in the Spike Relays. Below you should be using the ones on the far right at the top of the breaker board for the cim motors.
|
We are using the 40A self resetting circuit breaker, but becuase theres the breaker panel and the main breaker, we say fuses because they are like the old fuses. They look like them and the almost work like them. The big difference is that they do reset and so you don't usually need to replace them.