Quote:
|
Originally Posted by stephenthe1
ok, actually they are the aux. buttons. (correct me if I'm wrong about the buttons' names). We're changing gears in our trans. with two pistons. I've never used pistons before. I'm pretty sure I just say "relay1_fwd = 1; and relay1_rev = 0;"" for the foward position and "relay1_rev = 1; and relay1_fwd = 0;" for the reverse. is this correct?
|
That is correct if your piston is connected to the outputs of a dual solenoid being controlled by a Spike connected to relay output 1.