Thread: pic: 1213 GROVES HS / TARDEC DRIVE SYSTEM
View Single Post
  #2   Spotlight this post!  
Unread 17-02-2005, 08:57
Jack Jones Jack Jones is offline
Retired
no team
  
Join Date: Jan 2003
Rookie Year: 2003
Location: Waterford, MI
Posts: 964
Jack Jones has a reputation beyond reputeJack Jones has a reputation beyond reputeJack Jones has a reputation beyond reputeJack Jones has a reputation beyond reputeJack Jones has a reputation beyond reputeJack Jones has a reputation beyond reputeJack Jones has a reputation beyond reputeJack Jones has a reputation beyond reputeJack Jones has a reputation beyond reputeJack Jones has a reputation beyond reputeJack Jones has a reputation beyond repute
Re: pic: 1213 GROVES HS / TARDEC DRIVE SYSTEM
Quote:
Originally Posted by groves
This is a full layout of how we made our drive system. At the top there is a full assembly. This is bulletproof which has been our team’s motto all season. There are six plates, three are welded to the platform, and three are bolted the previous three. Plate #1 bolts to the motor. Plate #2 is welded and fits the trans housing. Plate #3 is fit to bezel the front rim of the trans. Plate #4 is welded is press fit for a bearing. Plate #5 is also welded and press fit for the bearing. Plate #6 is the hubcap and keeps the shaft in place. This is all done with no chains. The entire assembly has a weight of 8.2 pounds and can be removed with 4 bolts on the stock frame. The wheels are 4” and painted for the banner sensors. In low gear we have about 5-feet/sec. Please post questions or comments.
Bulletproof!! OMG - I wish you wouldn't have said that!
__________________
This message is hidden because Jack Jones is on your ignore list.
Last edited by Jack Jones : 17-02-2005 at 09:00.