|
Re: Analog Joystick Schematic
For anyone just casually glancing at this schemo, Pin #1 is 5 volts coming into the joystick and Pin #4 is ground. The pots and switches with resistors are connected to the analog inputs on the OI and the switches without resistors are connected to the digital inputs on the OI.
Reference this schemo with the OI manual joystick connector lists.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
Last edited by Al Skierkiewicz : 17-02-2005 at 11:34.
|