[sirbleedsalot]

I am assuming that you just want to use the default code. So you can unzip the default code from ifi then open ifi loader and browse to the folder where your code is there should be a .hex file already compiled for you. Then connect the programing port on the robot controller to the serial port on the computer. Turn the robot on and press the program button on the rc then hit download on the ifi window. If there is an error it is probably that you have the wrong com port selected so go and try all of them from the drop down menu until one works. If you can't get it to work then there will be teams that will help you at your regional.