Quote:
|
Originally Posted by Nitroxextreme
we are having problems with out fuse on the spike for the compressor
it continually blows
is there any reason for this
is there anything that can be done
 |
Several years ago, we had a problem with blowing the compressor
fuse. The problem was traced to a bug in the RC program what was
intermittently reversing the polarity on the compressor while it was
running. Look for bugs in your code that might be doing this,
and you can wire the spike so that an intermittent reversal does
not apply reverse polarity power to the compressor (only shuts it off).