Quote:
|
Originally Posted by sanddrag
Or will something like this work? http://www2.towerhobbies.com/cgi-bin...&I=LXJC35&P=ML I just don't know how I'd attach the spinner cone to the shaft though.
Or maybe it would be best to just figure out a way to mount the engine from the back so I can use the stock pull starter. |
that starter is used for RC airplanes.. theres a plasticy concave fitting on the output shaft that fits into the convex propeller hub... it should have enough torque to turn over that small engine, but getting the starter to fit onto the shaft will probably be the hardest part of using it.. good luck