|
Re: How did you use the FP motors?
We used two FP's to power our 5 foot arm to pick up tetras. We made a custom gearbox to give 270:1 reduction and then a 9 tooth sprocket to a 60 tooth sprocket to gives a total reduction of 1800:1. It works very well so far, even with limiting in programming to 9.6 Volts. We'll replace them with the 12 V motors at competition in a few days - and be very well set.
Here's a pic of them ...
__________________
Work Hard, Have Fun, Make a Difference!
Last edited by Doug G : 02-03-2005 at 01:31.
Reason: fixed link
|