Quote:
|
Originally Posted by KTorak
We are iffy on this new connector, our robot got hit causing the wire to pull out of the connector in a seeding match (our second of the day). We were very dissappointed that it came out considering we originally had a really good crimped connection.
|
There is good reason to be iffy on this connector, but it is required by the rules this year. If you do not solder the wire in after you have tightened the screw, it can pull loose as you have experienced. If you solder, you need to use a larger iron and clean the copper well before you assemble the connector. Tin plating helps soldering a great deal if you have means to do this.