View Single Post
  #5   Spotlight this post!  
Unread 22-03-2005, 16:16
Crebb's Avatar
Crebb Crebb is offline
Registered User
AKA: James M.
FRC #5279 (Bionic Eagles)
Team Role: Mentor
 
Join Date: Mar 2004
Rookie Year: 2003
Location: Lynchburg, Va
Posts: 181
Crebb has much to be proud ofCrebb has much to be proud ofCrebb has much to be proud ofCrebb has much to be proud ofCrebb has much to be proud ofCrebb has much to be proud ofCrebb has much to be proud ofCrebb has much to be proud ofCrebb has much to be proud of
Re: pic: 35 MPH Prototype

Quote:
Originally Posted by M. Krass
That is approximately the CIM motors free speed. The motors are operating under load, so the actual output RPM is going to be something far lower than that. Additionally, if you're using the FIRST provided circuit breakers, the motors will draw more than 40A under load at a speed considerably lower than 5200 RPM, were they ever to go that fast.

If your robot were traveling 35 MPH, it'd be able to cross a football field in six seconds. Can it?
We did have trouble tripping the breakers. The first time we tried it out we only had one CIM per gearbox, but we added two more. The road we tested on had a slight hill, so if we started off in first gear and shifted into second it did fine. As for the football field in 6 seconds, it would be close. I need to find a radar gun somewhere.
I admit that it isn't practical and we wont use this setup on our robot next year (most likely), but it sure is fun.
__________________
Shibuya Hoppmann, Mechanical Engineer
VCU School of Engineering 2012

Team 5279 2016-Present
Team 384 2003-2015