OK, so I have this final project for my class in school and I have some clue but I thought I'd let all my fellow FIRSTers weigh in on it. Here's the details:
I have to make a machine that will move a marble 10 inches in any direction, and then return it to its starting position.
Rules:
Can only touch the machine once to start it.
Use a battery supply.
Maximum of 2 feet by 2 feet.
Place it on a level tabletop.
Include motor/gears, relay, switch,conductors and Incorporate 2 Different simple machines in the machine;
-Lever
-Inclined Plane
-Wedge
-Gear
-Pulley
-Belt Drive or
-Wheel and Axle
-Cant touch the marble to start it
If you have any ideas, suggestions/comments, reply at will.
