|
Re: portable controls w/o using tether
Attached is the OI power system the captain and I made. It has a wall jack for 9v input and the transfer switch is near by. in the lower right corner, three 9v batteries are visible. In my previous post, I mentioned that I was making another one. It's still under construction because I discovered the charge controller I was going to use from a backup battery charger wasn't in use for a good reason (It smelled like a burnt victor and, upon further inspection, I discovered one of the IC's had violently lost half it's mass at some point).
__________________
EEEEWEEEZEEE
was here
|