Thread: Victor Burnouts
View Single Post
  #13   Spotlight this post!  
Unread 24-05-2005, 12:39
WizardOfAz's Avatar
WizardOfAz WizardOfAz is offline
Lead Mentor
AKA: Bill Bennett
FRC #1011 (CRUSH)
Team Role: Engineer
 
Join Date: Mar 2003
Rookie Year: 2002
Location: Tucson, AZ
Posts: 101
WizardOfAz will become famous soon enough
Send a message via AIM to WizardOfAz
dummy load / test load for Victor speed controller

We'd like to build a test setup for the Victors. Anybody have a suggestion for a cheap fixed resistance dummy load? I don't want to use a motor because the motor is not fixed resistance and it's hard to measure motor power output. Would like to have the ability to set the resistance to about 0.32 ohms to get a 40 A max current test, and also to something like 2.5 ohms for a 5 A max current test. Would like to use a fixed resistor that would spread the heat dissapation over a large area so it doesn't get dangerously hot (500+ watts for the 40 A test).

I can put a big resistor in a can of oil like we do in RF power testing. Anybody got a better idea?

Bill