|
Re: Running a 9.6V drill at 12V
Echoing what Cory stated, you will increase the power dissipation at stall to 156% of full rated. These motors need to turn in order to cool themselves. In a stall condition, a failure is much more likely at 12V than at 9.6V.
Mike
__________________
Mike Betts
Alumnus, Team 3518, Panthrobots, 2011
Alumnus, Team 177, Bobcat Robotics, 1995 - 2010
LRI, Connecticut Regional, 2007-2010
LRI, WPI Regional, 2009 - 2010
RI, South Florida Regional, 2012 - 2013
As easy as 355/113...
|