|
Re: Current reversed on compressor spike controller
Quote:
|
Originally Posted by mechanicalbrain
Well thats when we remembered that not all our pwms were long enough to reach the controller so instead of splicing them and soldering two together we had just connected them and taped them and the splice had come apart!
|
A good way to connect two PWM's end to end is to tie a knot and then tape the connectors and knot.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|