The team pre-inspection worksheet that was sent tonight lists 30" x
32" x 42" as the inspection size of the robot, but the robot build rules say 30" x
33" x 42"
Quote:
|
RB6: Robot weight is limited to a maximum of 125 pounds, including all decorations. The entire robot must fit within a 30” by 33” footprint and be no more than 42” in height at the start of the match. ...
|
I have a feeling that the 32" is probably a typo, and I would just like a clarification. Our robot has been for the past four weeks designed on a base footprint of 30" by 33" because that is what the rules stated.
_Alex