Thread: PWM connectors
View Single Post
  #4   Spotlight this post!  
Unread 17-12-2005, 00:35
BrianBSL BrianBSL is offline
Registered User
FRC #0190
  
Join Date: Sep 2004
Rookie Year: 2000
Location: Worcester, MA
Posts: 251
BrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud of
Re: PWM connectors
Quote:
Originally Posted by Mark McLeod

P.S. Rickertsen2 Sorry, I didn't mean to imply you couldn't get other .1 connectors through DigiKey. I only meant to share my experience with the Molex ones. We have and do use other manufacturers connectors as well. I just don't have those part numbers within easy reach.
Actually, I wouldn't say thats a bad implication. The only other ones that I have found from digikey are the AMP ones, and the housings are too large to fit next to each other. Go with the molex ones from Digikey if you are buying other stuff from them or the Jameco ones. We've used both (mostly the molex ones) and they work fine.

You can also get "servo style" connectors off ebay, but the Jameco ones are likely the best bang for your buck.