|
Re: Drilling Lubricant
We have been using a blue tapping wax for our aluminum cutting. You rub it on the cut line or hole mark and on the blade or drill. The wax melts as the heat builds. The cut time is reduced and there is no fluid splash. It excels at tapping aluminum.
I found it in stick form from McMaster part number 10275K32.
__________________
Andy Brockway
Team 716, The Who'sCTEKS
Last edited by Andy Brockway : 21-12-2005 at 07:50.
Reason: added McMaster #
|