|
Re: PWM connectors
Quote:
|
Originally Posted by eugenebrooks
The three pin female housing is Digikey WM2801-ND.
The female connector that goes into this housing is Digikey WM2554-ND.
We don't use the male pins, but these are part number WM2515-ND.
Don't forget the proper crimper. We use Digiikey WM9997-ND,
this being the proper Molex crimper for these connectors. There is
a cheaper multi-purpose crimper, WM9999-ND, and we use this
crimper on other kinds of connectors, such as those for the backup
battery, but it is not well suited for the C-Grid connectors.
|
Just to help round things out here, the male pins will be needed if you are working with VEX and need to make up your own cables to attach sensors such as potentiometers or custom micro switches to the analog/digital inputs.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|