Thread: Question regarding commands of CMU Cam - Not listed in the guide
View Single Post
  #1   Spotlight this post!  
Unread 12-01-2006, 19:18
Phreakuency's Avatar
Phreakuency Phreakuency is offline
Registered User
AKA: Chris Lamport
#1058 (PVC Pirates)
Team Role: Programmer
  
Join Date: Jan 2005
Rookie Year: 2003
Location: Londonderry
Posts: 11
Phreakuency will become famous soon enough
Exclamation Question regarding commands of CMU Cam - Not listed in the guide
A few things that are in the java GUI version but I can't find the commands for are the auto servo, which I don't know if that is a sub program in itself or not, because it seems to long to be a function, and what the command for white balance is. Any help on these would be greatly appreciated.
Also, when my tracking is %100 always dead on (it is at probably %82 right, so most of the time) I will upload all my notes to help the other teams with the same problems.
Thanks in advance,
Phreakuency
__________________
~~All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. (1925 IBM Maintenence Manual)~~