|
Re: Charging 7.2V Backup Battery
I also see some weirdness in this circuit, but for anyone that wants to build it, I already put together the list of parts from Mouser. Sorry for the horrid formatting (this is a paste straight from their cart). The Tantalum cap's can probably be substituted for ceramics if you have them laying around or for cost reasons. Here are the part #'s that I chose:
Code:
610-CZ5345B CZ5345B Central Semi Diodes - Zener
DO-201 8.7V 5.0W
$ 0.520
511-LM317T LM317T ST Voltage Regulators
TO-220AB 1.2-37V Adj Positive - RoHS COMPLIANT per producer documentation
$ 0.460
625-1N5820 1N5820 Vishay Semiconductor Schottky Rectifiers
DO-204AL Vr/20V Io/3A BULK
$ 0.290
271-221-RC 271-221-RC Xicon 1/4W 1% Metal Film Resistors
221ohms 1% 50PPM - RoHS/Pb-FREE per producer documentation
$ 0.090
271-1.24K-RC 271-1.24K-RC Xicon 1/4W 1% Metal Film Resistors
1.24Kohms 1% 50PPM - RoHS/Pb-FREE per producer documentation
$ 0.090
294-43-RC 294-43-RC Xicon 1W 5% Carbon Film Resistors
43ohms 5% - RoHS/Pb-FREE per producer documentation
$ 0.140
294-22-RC 294-22-RC Xicon 1W 5% Carbon Film Resistors
22ohms 5% - RoHS/Pb-FREE per producer documentation
$ 0.140
80-T350A104K035 T350A104K035AS Kemet Dipped Radial Tantalum Capacitors
35V 0.1uF 10% - RoHS non-compliant/CONTAINS Pb
$ 0.300
__________________
My posts represent my personal views only, and do not represent the views of either my team, Team 190, nor its primary sponsor, Worcester Polytechnic Institute.
|