Quote:
|
Originally Posted by ryan_f
We are having two problems with our camera. We aren't exactly sure how to get the servo motors to move so the camera can track a target. Our camera is able to track targets fine with labview but there's just no movement in the servos. We connected them to pwm01 and pwm02 and used the default 2006 camera code.
|
If you want LabView to be able to track the green light, you will need to use the servo outputs on the camera instead of sticking them into pwm01, and pwm02. There is however the question if this is legal with the rules, as currently that is unknown.