Thread: Connecting 7.2V (directly) to camera
View Single Post
  #13   Spotlight this post!  
Unread 14-01-2006, 21:03
devicenull devicenull is offline
Robot? We need a robot?
no team
  
Join Date: Sep 2004
Rookie Year: 1234
Location: n/a
Posts: 359
devicenull is just really nicedevicenull is just really nicedevicenull is just really nicedevicenull is just really nicedevicenull is just really nice
Re: Connecting 7.2V (directly) to camera
Quote:
Originally Posted by scottmso
Alright, we're having some problems. I can't get LabView to see the camera (I get an error message when I try to run it.) I can get an output from the CMUcam in HyperTerminal, but all I get is the message that says CMUcam and the version, and sometimes an "ACK". Sometimes the letters in HyperTerminal are off. (like !CK rather than ACK) Any ideas on how I can get this working? I've tried two different serial cables, and I've made sure the baud settings in Windows/HyperTerminal are set to what they should be (according to the manual). Any advice greatly appreciated - thanks!
Did you install the VISA app on the labview driver CD? The camera gui seems to need it to work, did you change the com port it was using too? (Box in top left corner)