Thread: Labview CMUcam demo problem
View Single Post
  #2   Spotlight this post!  
Unread 14-01-2006, 22:26
Joe Hershberger Joe Hershberger is offline
National Instruments
AKA: jhersh
FRC #2468 (Appreciate)
Team Role: Mentor
  
Join Date: Nov 2005
Rookie Year: 1997
Location: Austin, TX
Posts: 148
Joe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to all
Re: Labview CMUcam demo problem
Quote:
Originally Posted by Windward
Currently, I'm trying to get labview to work with the CMU camera. The camera is powered and our serial plug is plugged in, yet when I set the com to comport4 and press run, it does not run. I am not sure what the problem could be. I am not sure what the program demo itself is supposed to do, but I get an error stating there was a problem connecting. The error states that the error could be because of lack of power or a serial connection problem.

But I am pretty sure there is power and it is connected properly.

FYI, we are using a USB to serial converter, which works with the robot controller.

Any advice?
Take a look at this post. Try the suggestions there and see if you still have the problems.

Good luck!
-Joe
Reply With Quote