Thread: COM port settings for CMUcam labview testing and programming
View Single Post
  #1   Spotlight this post!  
Unread 15-01-2006, 15:06
pwilczynski's Avatar
pwilczynski pwilczynski is offline
Registered User
FRC #0236 (Techno Ticks)
Team Role: Programmer
  
Join Date: Jan 2006
Rookie Year: 1993
Location: Connecticut
Posts: 52
pwilczynski is on a distinguished road
COM port settings for CMUcam labview testing and programming
During testing today, we found out that the COM port needs a slower speed than the CMUcam in Labview. Labview required 115200 but the programming speed was fine at the default setting (9600) but wouldnt work at the Labview speed.